Результаты (
русский) 1:
[копия]Скопировано!
Примечание: Текст на основе автоматических процессов оптического распознавания символов. Пожалуйста, используйте версию PDF по правовым вопросам ПОЛЕ ИЗОБРЕТЕНИЯНастоящее изобретение относится к методу для производства галогенидов серебра эмульсии и, более конкретно, к методу для производства тонкой и однородной табличных зерна.ФОНЕ ИЗОБРЕТЕНИЯМетод для производства зерна галогенидов серебра состоит из двух основных процессов зарождения и роста зерна. Здесь раскрываются в T. H. James, теория фотографического процесса, 4-ый Ed., Макмиллан (1977), «нуклеации представляет собой процесс, в котором формируются новые кристаллы, где происходит быстрое увеличение количества кристаллов. Рост означает добавление новых слоев для уже существующих кристаллов. В дополнение к выше нуклеации и зерно роста далее два больше процессы Ostwald созревания и рекристаллизация происходят при определенных условиях формирования зерна зерна фотографические эмульсии. Оствальд созревания ответственность прийти около когда распределения размеров зерна широкий при сравнительно высокой температуре и в присутствии галогенидов серебра растворителя. Рекристаллизация — процесс изменения кристаллической структуры.» То есть зерно ядро формируется на ранней стадии формирования зерна галогенидов серебра и рост зерна проводится только уже существующие ядра и количество зерна во время выращивания процесс не увеличивается.В целом галогенидов серебра зерна производятся реакции серебряной соли водный раствор и металлогалогенных водный раствор в коллоидной водный раствор в сосуд реакции. Одноструйный метод в котором защитного коллоида, например, желатин и металлогалогенные, водный раствор добавляются в реакционный сосуд и энергично помешивая защитного коллоида и металлогалогенных водный раствор, серебряная соль водный раствор добавляется к нему за определенный период времени; и двойной струи метод, в котором водный раствор желатина добавляется в реакционный сосуд и серебряная соль водный раствор и металлогалогенных водный раствор добавляются к нему за определенный период времени, в то же время известны. Когда сравниваются два метода, галогенидов серебра зерна, имея распределения размеров узкой зерна могут быть получены и металлогалогенных структура может быть свободно изменен с прогрессом роста зерна согласно методу двойной струи.Известно, что зарождения и роста зерен галогенидов серебра во многом варьируются в зависимости концентрации ионов серебра (галогенид-иона), концентрация растворителя галогенидов серебра, степень Пересыщение и температура реакции раствора. В частности неоднородность концентрации ионов серебра или галоидных Ион производства серебряной соли водный раствор и металлогалогенных водный раствор добавляется реакционный сосуд вызывает неравномерное градусов Пересыщение и растворимость в реакционный сосуд из-за неравномерного распределения каждой. В результате скорость кристаллизации или зерноводство скорость становится неравномерным в реакционный сосуд, ведущих к неоднородности галогенидов серебра кристаллов производства.Для снижения этой неоднородности, быстрое и равномерное перемешивание и реакция серебряной соли водный раствор и металлогалогенных водный раствор передается коллоидного раствора необходимо сделать единообразные концентрации ионов серебра или галогенид-иона в реакции судна во время формирования зерна галогенидов серебра. Различные исследования пока достигнут относительно реализации единой смешивания серебряной соли водный раствор и металлогалогенных водный раствор, например, ухищрениях перемешивания и смешивания аппараты для решения вышеуказанной проблемы раскрываются в США ПЭТ. № 3,415,650, Британский патент 1,323,464, ПЭТ США. № 3,692,283, JP-B-55-10545 (термин «JP-B» здесь означает «изучить японской патентной публикации») и JP-A-57-92523 (термин «JP-A» используется здесь означает «нерассмотренные опубликованные японской патентной заявки»). Методы производства и смешивания аппараты, раскрыта в эти патенты состоят из структуры, состоящий из корпуса, имея открытую площадку и ротор в корпусе, который предоставляется в реакционный сосуд и серебряная соль водный раствор и металлогалогенных водный раствор добавляются к смешивания судна и оба быстро смешиваются во время распыления с коллоидного раствора в реакционный сосуд.Однако хотя местные неравномерное концентрации ионов серебра и металлогалогенных иона в реакционный сосуд этих аппаратов может быть решена конечно, неравномерное концентрации по-прежнему существуют в смесительной емкости, в частности, значительные концентрации неравномерно распределяются вблизи кормления сопла серебряной соли водный раствор и металлогалогенных водный раствор и вокруг перемешивания лезвия. Галогенидов серебра, зерна, поставляемых для смешивания сосуд с защитного коллоида пройти через такой неоднородной часть и более важным фактом является что галогенидов серебра, которую зерно быстро растут в эти части. Это означает, что рост зерна происходит неравномерное частей концентрации. Таким образом не могут быть достигнуты рост зерна единообразных галогенидов серебра.Производство методы, в которых реакции судна независимо от смешивания судна для решения распределения неоднородных концентрации ионов серебра и металлогалогенных Ион более полной смесью раскрываются в JP-A-53-37414, JP-B-48-21045 и ПЭТ США. № 3,897,935. Однако Коллоидная водный раствор в сосуд реакции этих аппаратов также распространены для смешивания судна и галогенидов серебра зерна также растут с проходом через неравномерное частей.Производство метод для решения этих проблем раскрываются в JP-B-7-82208, JP-B-7-23218 и ПЭТ США. № 4,879,208. Согласно этих методов, смешивая судна предоставляется вне реакционный сосуд, где нуклеации и/или зерно роста зерен галогенидов серебра являются причиной, серебряная соль водный раствор и металлогалогенных водный раствор предоставляются сказал смешивания судна и них смешанные формы серебра галоидных мелкими зернами, сформированные мелкими зернами немедленно поставляются в реакционный сосуд и нуклеации и/или рост зерна проводятся в рамках сказал реакции судна. Этот метод характеризуется в том, что формирование галогенидов серебра путем добавления серебряной соли водный раствор и металлогалогенных водный раствор существенно не проводится в реакционный сосуд, где проводятся нуклеации и/или зерно роста зерен галогенидов серебра, и далее циркуляции эмульсии в реакционный сосуд для смешивания судно не проводится вообще. Согласно этому методу чрезвычайно мелкие зерна, сформированные в смесительной емкости введена в реакционный сосуд и разошлись в реакционный сосуд, помешивая. Как очень тонкой зернистости, зерно легко растворяются и ионы серебра легко релиз галогенидов ионами. В результате может быть вызвано равномерное нуклеации и/или зерно роста.A method for producing an extremely thin tabular grain emulsion having an average thickness of less than 0.07 μm according to Dual Zone Process is disclosed in European Patent Application No. 507701A. This patent discloses a method for producing extremely thin tabular grains by the same methods as disclosed in the above JP-B-7-23218, JP-B-7-82208, U.S. Pat. No. 4,879,208 and European Patent Application No. 326852B. According to this method, tabular grain nuclei are formed by adding a silver nitrate aqueous solution, an NaBr aqueous solution and a gelatin aqueous solution respectively independently to a mixing vessel within a short period of time (from 0.5 minutes to 2 minutes), the silver halide fine grain emulsion formed is transferred as it is to a reaction vessel containing a gelatin aqueous solution, ripened, thus tabular grain nuclei are formed, thereafter silver halide fine grains are further transferred in the same manner from the mixing vessel to the reaction vessel and tabular grain nuclei are grown to obtain extremely thin tabular grain emulsion.It has become possible to produce thin tabular grains having such the high uniformity but an important point in this method is to form extremely fine grains having a finer grain size well controlled in a mixing vessel.The mixing vessel shown in FIG. 5 is disclosed in JP-B-7-82208, JP-B-7-23218 and U.S. Pat. No. 4,879,208. In FIG. 5, 7 indicates a mixing apparatus, a reaction vessel 1 is provided therein, and a rotary shaft 11 fitted with stirring blades 9 is provided within the reaction vessel 1. A silver salt aqueous solution, a halide aqueous solution and a protective colloid aqueous solution are supplied from three feeding ports (4 and 5, another is omitted from the figure), mixed rapidly and vigorously by rotating the rotary shaft at high speed (1,000 rpm or more, preferably 2,000 or more, more preferably 3,000 rpm or more), the solution containing extremely fine silver halide grains formed is immediately discharged through a discharging port 8 to the outside and added to a reaction vessel where nucleation and/or grain growth of silver halide grains are conducted.A concrete example of this mixing machine is shown in FIG. 6. This apparatus is one manufactured by WILLY A PACHOFEN AG MASHINEN FABRIK. This apparatus is constructed of a stirring tank 42 of an almost cylindrical shape and a plurality of stirring blades 43 which are rotation-driven in the stirring tank 42. The stirring tank 42 is an almost closed vessel of the structure provided with a solution-feeding port 44 on one side to introduce an objective solution of stirring and a solution discharging port 45 on the other side to discharge the solution after stirring processing. A plurality of stirring blades 43 are fixed on a sleeve laid on a rotary shaft 46 protruding through the end wall of the other side of the stirring tank 42. These stirring blades rotate in a body with the rotary shaft 46 through the sleeve to accelerate stirring of the solution in the stirring tank 42. The rotary shaft 46 is rotation driven by the motor shown in the figure.There are problems in the mixing vessel shown in FIG. 5 with respect to the
переводится, пожалуйста, подождите..